Quadrafire 1200i won't start up

[arking1]

I originally posted this in a different thread but I think I have more of a problem then I originally thought. I was having trouble with the convection motor not starting up. So I was going to switch Snap Disk 1 out with an adjustable snap disk. But now my stove doesnt even start up. I put the original snap disk 1 back in to eliminate that variable for now. The red light comes on and the blue light blinks when I first plug in the stove. But the stove never does anything else. I jumped out snap disk 1 and the convection motor will start and keep running, but the stove still doesn't start. I am not sure what to try next. Any guidance would be greatly appreciated.

Thanks
Ryan

 

[reallyte]

I presume u mean exhaust motor if it doesn't start?

 

[arking1]

No I think when I am jumping the #1snap disk the convection blower is starting becuase I can feel air blowing from the stove.

Ryan

 

[Delta-T]

does your combustion blower come on?

 

[arking1]

does your combustion blower come on?

No...

 

[Delta-T]

if you have the unit on a themostat, make sure you have the temp set high enough to tell th e machine to come on. I dont actually do work on the quad, so I dont have a lot of input. sorry.

 

[PutnamJct]

Check out this thread: it gives a good breakdown of what turns on when and why.
https://www.hearth.com/talk/threads/quadrafire-santa-fe-not-feeding-pellets.114298/