Resolute 1/2 front door gasket size and length

[rwh63]

can't seem to track down a spec sheet for all the gaskets used on these stoves. in particular, looking for the drop down door gasket probably a 5/16 but not sure.

 

[begreen]

Yes, 5/16" is correct. Woodman's sells the Meeco replacement kit with a 6' length of 5/16" rope gasket. Midwest Hearth is another good source. Here is what they list for the Resolute I & 2:

RESOLUTE I & II 00042 & 00043 (Single Drop Down Door)

120-3588 1-00-1203588 5/16" Medium Density 6ND Fiberglass Gasket 5' Door

120-3668 1-00-1203668 5/16" Gasket Wire Fiberglass with Core 3.3' Griddle

30000776 1-00-30000776 3/4" Flat Fiberglass Glass Gasket Black 5' Glass

120-3560 1-00-1203560 1/4" Fiberglass Gasket 3' Flue Collar

Vermont Castings Individual Gaskets and Amounts

Complete list of Vermont Castings stoves and what individual gaskets are used for that specific appliance. This page will tell you the original part numbers, the type (size) of gasket needed, the location the gasket is used, and the amount needed for that location. ASPEN 1920120-3591...

midwesthearth.com

 

[rwh63]

thx. just located that thread. might have some kicking around. just for the door. didn't want to use the wrong size. gonna bookmark and print that list!

 

[begreen]

Note that gaskets come in different densities. A low density gasket in this case may not seal well. Same for a very high density gasket.