Resolute 3

[MnCabin]

Hi all,
I have a Resolute 3, i don't know how old it is but i've been burning few years with it.
I think one of the logs came in contact with the right side glass and broke.
Where do you get parts for this stove?
Also, i could use new gaskets all around, do i go with 5/16 rope?
Thanks in advance!

 

[begreen]

The Resolute 3 was from the early 1980s. It's a good stove. The glass and gasket kit are available from Woodmans or make a cardboard template and get the glass online (onedayglass.com) or at a good quality glass store. It will be a pyroceram glass.

Vermont Castings Resolute III 0043 & 0042 | Wood | Available Part

Vermont Castings Resolute III 0043 and 0042 wood stove available parts include but are not limited to andirons, dampers, and gaskets

www.woodmanspartsplus.com

 

[MnCabin]

The Resolute 3 was from the early 1980s. It's a good stove. The glass and gasket kit are available from Woodmans or make a cardboard template and get the glass online (onedayglass.com) or at a good quality glass store. It will be a pyroceram glass.

Vermont Castings Resolute III 0043 & 0042 | Wood | Available Part

Vermont Castings Resolute III 0043 and 0042 wood stove available parts include but are not limited to andirons, dampers, and gaskets

www.woodmanspartsplus.com

Thanks!