Soon I plan on going ahead with a stove install. I have purchased the Simpson Duraplus through the roof kit and triple wall chimney pipe. I've been waiting on some cooler weather before spending the day in my attic running the chimney. This will be a straight through the roof, completely vertical, install. Due to a close clearance to a beam near the ceiling in my planned location I will have to use double wall DVL or put a pipe shield on some single wall next to the beam I suppose. I'm planning on getting a piece of telescoping double wall through Dynamitebuys.
DVL 8647
http://www.dynamitebuys.com/store/cart.php?m=product_detail&p=832
My question is am I going to require an adapter for the DVL at the ceiling support box or will it mate right up? I'm also not sure about the joint at the stove collar. I assume the inner liner of the DVL might slip inside the stove collar. Or is there an adapter for that joint too?
Thanks!
DVL 8647
http://www.dynamitebuys.com/store/cart.php?m=product_detail&p=832
My question is am I going to require an adapter for the DVL at the ceiling support box or will it mate right up? I'm also not sure about the joint at the stove collar. I assume the inner liner of the DVL might slip inside the stove collar. Or is there an adapter for that joint too?
Thanks!