Start up Sequence (what is the duration?)

[AvalonPellet]

'ello,

Avalon Newport Avanti (spumante [ps])


Says in the manual...... the sequence is ten minutes?

My bottom lite blinks for about a half an hour....initial start up?..

Then is finally stays lit......

Then the machine stops feeding the auger...... (hear a snap disc pop the feed bin one it think pops )

then the machine blinks (maint req'rd)

What do you think?

new parts : control board..... convection fan.....

was running like this before parts installed
but only after the fuse blew on the control board.

See other post if you want for explicit details of the Saga
(Convection fan issues ----- fan does not turn off ever)

AVP

 

[Jhawknseattle]

I have a newer lopi and the time from startup to flame is less than 5 minutes and total startup to fan kicking on is 10 minutes. I have noticed that is the area right in front of the igniter gets really dirty it will take a long time.

 

[AvalonPellet]

Ten minutes.... makes sense...

mine..... at the moment..... blinking 30 minutes.....

Need to find the cause.... thoughts?

 

[AvalonPellet]

I by passed the Hopper Snap Disc

In about ten minutes time... the Stove was/is running.....

Appears to be a bad hopper snap disc