Have a 5502M just got a couple of weeks ago. Tried all different type of settings and the stove will burn for a while then got out and a pressure builds up and sounds like a back fire and smoke rolls out of the tee. What is causing this???
Stove won't stay burning
- Thread starter Casteele
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
JRemington
Minister of Fire
R9R
Member
I'm far from an expert but sounds like a blockage or issue in the venting, maybe not letting the flue gasses out properly? Have you confirmed the exhaust vent is clear, pulled cap off the T and confirm the same? All the way back to the appliance connector on the stove maybe?
There's plenty of experts here though, you're in good hands.
There's plenty of experts here though, you're in good hands.
tlc1976
Minister of Fire
Similar threads
