Tips for new Granberg File-N-Joint Filing Guide owner?

[wahoowad]

I received a Granberg File-N-Joint yesterday. It seems like a simple enough device but wondering if there are any tips people can share that would be helpful to know as I am starting out?

I have an old abused chain that I am going to practice on a few time before working on my good chains. The chain is a little rusty but I'm soaking it in chain oil before putting back on my beater WildThing. I'll cut on a few discarded crotches, see how it cuts, then see how it cuts after touching up with the Granberg.

 

[wahoowad]

Well, I guess this filing jig isn't as popular as I thought. I spent some time using it yesterday and really like the mechanics of how it worked. It was rock solid as I filed each tooth so definitely going to be more consistent on holding the proper filing angles.

 

[WES999]

I have one very similar to the Granberg , I got off Ebay, never heard of the brand.
After a little practice it is quite easy to do a good job sharpening.
I really like it.

 

[Clarkbug]

Well, I guess this filing jig isn't as popular as I thought. I spent some time using it yesterday and really like the mechanics of how it worked. It was rock solid as I filed each tooth so definitely going to be more consistent on holding the proper filing angles.

I think its pretty popular, they have been around a long time and can produce excellent results once you get it dialed in to your setup. I know I just wasnt spending any time indoors yesterday since it felt like spring for the first time

I dont own one, so I cant help you much with tips. But play with it, get it set up, and you should be set to really sharpen some chains.

 

[Firewood Bandit]

I had a Granberg and got rid of it because I didn't care for it. I am not saying they don't work. When using a file I prefer to just do it by hand and feel.

For accurate angles a bench grinder is pretty yard to beat.