Vigilant 1A legs

[ovie832]

Hey everyone. Purchasing a vigilant 1A this weekend that has short legs. (At least I believe it is a 1A. It has long doors with glass and one piece fireback)

Would prefer to have the longer legs. Are there VC legs still for sale that will work? Or do I have to go hunting to the originals? Thanks!

 

[DAKSY]

Try Here:

Replacement stove parts | Woodman's Parts Plus | Stove Gas Wood Stove Parts

Woodman's Parts Plus offers over 20,000 in stock parts for your wood, coal, gas, oil or pellet unit, as well as barbecues and outdoor power equipment. Over 400 old and current manufacturers, with unique parts and patterns.

www.woodmanspartsplus.com

 

[ovie832]

Try Here:

Replacement stove parts | Woodman's Parts Plus | Stove Gas Wood Stove Parts

Woodman's Parts Plus offers over 20,000 in stock parts for your wood, coal, gas, oil or pellet unit, as well as barbecues and outdoor power equipment. Over 400 old and current manufacturers, with unique parts and patterns.

www.woodmanspartsplus.com

Doesn’t look like they have the legs unfortunately

 

[DAKSY]

Doesn’t look like they have the legs unfortunately

Did you call them?

 

[ovie832]

Did you call them?

Will call tomorrow for sure.

Real stupid question. My vigilant 1A had the flue collar set to go straight out the back. Do I just need to flip it around for it to go straight up? I wasn’t sure if they all were reversible.

 

[DAKSY]

Yup. Reversible. Remove the fasteners, flue collar & gasket. Replace the gasket, reverse the collar & re-secure the fasteners.

 

[ovie832]

Yup. Reversible. Remove the fasteners, flue collar & gasket. Replace the gasket, reverse the collar & re-secure the fasteners.

Amazing thank you. Of course the screws as seized up. Lol

 

[DAKSY]

Spray em with PBlaster & let em sit.
I like to use a manual impact screwdriver to loosen stuck
fasteners in old stoves after soaking them.
Good luck!

 

[ovie832]

Spray em with PBlaster & let em sit.
I like to use a manual impact screwdriver to loosen stuck
fasteners in old stoves after soaking them.
Good luck!

I’ll try that! Thanks so much for all your help. Really appreciate it!

 

[Hubbyho]

Hey everyone. Purchasing a vigilant 1A this weekend that has short legs. (At least I believe it is a 1A. It has long doors with glass and one piece fireback)

Would prefer to have the longer legs. Are there VC legs still for sale that will work? Or do I have to go hunting to the originals? Thanks

 

[Hubbyho]

I would happily buy this short legs from you if you still have them. Thanks. Don

 

[Defiant 3]

I have a set of long legs should you need.
info@grahamthestoveman.com