Breckwell P24I Poor heat output

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
2

2hotty

New Member
Mar 13, 2009
9
Central Ontario
I recently installed a Breckwell insert in my basement fireplace. I have a Breckwell free standing stove on the main floor. I get a lot less heat output from my insert than my freestanding stove. The specs. say I should get the same. Could this be because I am going into a 6" chimney liner and no back pressure = all the heat up the chimney?
Anyone like to give an opinion?
 
Status
Not open for further replies.

Similar threads

S
Breckwell P2000i Pellet Stove Problems - Need Help!
Replies
4
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
spencer.martin
S
J
OAK for pellet insert on interior chimney with three flues
Replies
2
Views
488
The Pellet Mill - Pellet and Multifuel Stoves
jeffreybcox
J
M
Heating w/ Breckwell Sonora
Replies
0
Views
222
The Pellet Mill - Pellet and Multifuel Stoves
Mbentley200
M
Pelletman308
Installing pellet insert in a duplex chimney configuration?
Replies
6
Views
479
The Pellet Mill - Pellet and Multifuel Stoves
Pelletman308
Pelletman308
C
Insufficient heat output
Replies
94
Views
5K
SBI: Century,Drolet,Osburn,Valcourt,Englander
CTwoodinsert
C
Top Bottom
Back