Mt. Vernon Igniter

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

joescho

Feeling the Heat
Hearth Supporter
Feb 11, 2009
391
Northeastern PA
Is the correct igniter part number SRV7000-647 (300 watt - pellet only)
or SRV7000-462 (380 watt)?

Looking to have a spare and want to make sure I get the correct part. I have the AE insert. (2011)


I was also thinking when I pull the unit in the spring for cleaning I would also pull the convection blower and clean. Does that housing gasket need to be replaced when pulled? I think that is SRV7000-332.

Already have the combustion gasket.

Thanks
 
No need to replace the gasket. The new igniter was designed for longer life, and from the research I have done there was no compromise in performance.
 
  • Like
Reactions: smoke show
I was also thinking when I pull the unit in the spring for cleaning I would also pull the convection blower and clean. Does that housing gasket need to be replaced when pulled? I think that is SRV7000-332.


my freestander doesnt have a convection blower gasket.

edit- I think your confusing the comb blower housing gasket for a convection blower gasket.

your convection blower should not have a gasket unless something changed.
 
  • Like
Reactions: Defiant
my freestander doesnt have a convection blower gasket.

edit- I think your confusing the comb blower housing gasket for a convection blower gasket.

your convection blower should not have a gasket unless something changed.

You are right, no gasket on the convection blower. I misread "combustion" blower.
 
my freestander doesnt have a convection blower gasket.

edit- I think your confusing the comb blower housing gasket for a convection blower gasket.

your convection blower should not have a gasket unless something changed.
He knows his chit:p
 
  • Like
Reactions: smoke show
But those numbers are the correct ones for the igniters?
 
Status
Not open for further replies.