I was working around this issue all last winter, but in the Spring the unit wouldn't feed pellets. The trick I used (other than cleaning the heck out of it) was to vacuum out the pressure hose and it would run for a week or two. However, that stopped working and then I used to jiggle the hose as I started it up and it would start feeding pellets again. I've checked numerous times for obstructions but it's all clean. Blower is running. Doors have a good seal.
I assume the pressure switch hasn't tripped because my tricks worked for a while (but it is really hard to see from the manual where all the switches are).
Can someone give me a couple of tips on how to isolate the problem?
Also, this is an insert so I have to pull it part way out to test it, are there any tricks here?
Thanks!
I assume the pressure switch hasn't tripped because my tricks worked for a while (but it is really hard to see from the manual where all the switches are).
Can someone give me a couple of tips on how to isolate the problem?
Also, this is an insert so I have to pull it part way out to test it, are there any tricks here?
Thanks!