St Croix Hasting multi fuel pellet chamber conversion

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Latent

Member
Hearth Supporter
Dec 31, 2008
20
Mid CT
Has anyone changed out the basic chamber for pellets and converted over to the multi fuel (for corn and other seeds) chamber ?
My understanding is this would remove the VG motor system.
 
The hastings the way it is set up you can run a 50/50 mix of pellet and corn.
 
I would like to know if someone has been burning pellets with the multi fuel setup.

I have some of the nosies associated with the vg motor/gear assembly with my St. Croix Hasting stove. I been burning pellets for the past three years now and even tryed corn mixture 50/50 last year. To convert over to the multi fuel I would loose the auto ignition aswell as the vg assembly making the unit quiter.
I have wired a timer in series with the vg motor from Fermtek # 102719 allowing the motor to run every hour for 5 minutes only making it more pleasing to sit next to the stove.
 
My St. Croix Pepin can burn 40-50% corn... never tried it though.

I'd hate to lose the Versa-Grate system... I don't HAVE to open the door to clean it for two weeks or more. I have a little fan vibration on my stove but the versa-Grate is totally silent as far as I can tell.

What kind of noise does yours produce?
 
The noise is from the gear box assembly (vg motor). I have squeezed Napa high temp greese directly into the gear box by seperating the motor from gear box.
This would quiet down the noise for a few days and slowly return. Timer has created a atmosphere so it's a pleasure to sit and watch tv next to the stove.

I all way had to clean the stove every three to four days when using New England pellets. Country Boy pellets I can go a week and sometimes longer with the use of the timer. Now cleaning I am just vacuuming cleaning out the areas around the grate weldment and ash pan. Every month I will clean out the hidden areas, pipe and combustion fan assembly.
I will say that I did have to use the leaf blower this year and it work just great.
 
Latent said:
The noise is from the gear box assembly (vg motor). I have squeezed Napa high temp greese directly into the gear box by seperating the motor from gear box.
This would quiet down the noise for a few days and slowly return. Timer has created a atmosphere so it's a pleasure to sit and watch tv next to the stove.

I all way had to clean the stove every three to four days when using New England pellets. Country Boy pellets I can go a week and sometimes longer with the use of the timer. Now cleaning I am just vacuuming cleaning out the areas around the grate weldment and ash pan. Every month I will clean out the hidden areas, pipe and combustion fan assembly.
I will say that I did have to use the leaf blower this year and it work just great.

A clean stove is a happy stove...
 
Status
Not open for further replies.