2006 austroflamm interga worked fine until I started pushing menu & enter button while stove was on

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

brianjon

New Member
Sep 2, 2017
9
New York
The stove worked great. I started pushing buttons on start up or after start up. Now it won't turn mots off. I unplugged it. Plug it back in #77 flashed. Started pushing buttons again stove starts but won't shut Dow normal. Now when I plug it in it goes through start up cycle. I have no idea what I've done. Need help please
 
Might want to have a conversation with these folks: http://www.pelletstoverepair.com/ Sounds like a board issue but you may want to rule out the usual issues with cleaning etc.
No it should not be a board issue. It worked great until I started pushing menu/enter not knowing what I was doing. I reached out to Joe but he only works on pre 2006☹️
It's as clean as new. Anyone out there have information on this 2006 stove.
 
No it should not be a board issue. It worked great until I started pushing menu/enter not knowing what I was doing. I reached out to Joe but he only works on pre 2006☹️
It's as clean as new. Anyone out there have information on this 2006 stove.
Sounds like a board issue to me also. Sometimes pushing buttons without knowing what you are doing can get the brain mixed up in the boards. If you punch to many things it won't be able to do them and lock up like a computer can do. Most of the time shutting it down or unplugging it will cause a reboot effect and after plugging it back in it will go into a default condition and will work like normal. I would suggest un plugging it for a few minutes then plug it back in and start over.
 
  • Like
Reactions: Lake Girl
Sounds like a board issue to me also. Sometimes pushing buttons without knowing what you are doing can get the brain mixed up in the boards. If you punch to many things it won't be able to do them and lock up like a computer can do. Most of the time shutting it down or unplugging it will cause a reboot effect and after plugging it back in it will go into a default condition and will work like normal. I would suggest un plugging it for a few minutes then plug it back in and start over.

I figured it out. I thoroughly read the startup procedure. I had it in timed mode. Put it in manual and it works great now.
Press off and it gou through 8 minute shut down. Thanks for making me read and reread the manual. This is my 6th austroflamm.
1 wega 1990 3 inserts1992/1993 and 1 free standing 1993
High quality stoves I buy them cheap refurbish and sell them for $500/700