quadra fire pellet stove

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. R

    Need Help!!! Quadra Fire Edge 60 bad/missed ignition | low flame | fire dies out

    Hi, I have a Quadra Fire Edge 60 pellet stove that was bought by former owner 12 years ago. Recently the stove takes really long time to ignite (probably 2-3 startup cycle to start fire. Possible igniter issue?). But then I noticed the flame is really low and weak which cannot reach the...
  2. R

    Quadra Fire Edge 60 slow ignition and low flame

    Hi, I have a Quadra Fire Edge 60 pellet stove that was bought by former owner 12 years ago. Recently the stove takes really long time to ignite (probably 2-3 startup cycle to start fire). But then I noticed the flame is really low and weak which cannot reach the thermocouple. I tried open the...
  3. G

    Quadra fire mt vernon- auto cleaning every 2 hours.

    I have a Quadra fire Mount Vernon pellet stove insert that is 12 years old. I have never been impressed with the efficiency and heat output. Most recently I’ve noticed that my stove auto cleans every 2ish hours. This is becoming even more of a burden since I find the stove doesn’t get very hot...
  4. M

    Quadrafire 1100i restart issues

    Hello, all! I’ve purchases a Quadrafire 1100i insert and it worked fine for serveral weeks but now is having major problems when it comes to restarting. If I manually turn up the thermostat it will start but once it gets up to temperature and turns off, it won’t start again. I have to restart it...
    • mwheeler1987
    • Thread
    • pellet stove quadra fire quadra fire pellet stove quadrafire 1100 quadrafire 1100i quadrafire advice thermostat
    • Replies: 3
    • Forum: QuadraFire
  5. S

    Quadra Fire Mt. Vernon 2009 temperature set to 82 and heats to 70

    It's cold out - probably 20's - and my Mt. Vernon cannot keep up with the set temperature of the room. I tried to set it at 76 but it barely gets to 70. It's fine on a warmer day. So I set it to 82 hoping it will at least get to 74 - Nope. Any advice?
  6. Y

    Mount Vernon Quadfire Stove Problem

    1) The auger motor quit running. I tested the motor its fine. I jumped the vacuum switch, fine, tested snap disk #2, fine, replaced anyhow so I decided it was the control box. I replaced that still no auger.If I put the control box to test mode everything tests fine, both fans, auger motor and...
  7. T

    Thermocouple ceramic cover

    ugh! Cleaning out the firepot and the thermocouple ceramic cover is broken in pieces inside. No where to purchase a new one for a couple of days. Can I still use the pellet stove without it? It works but I don't want to damage anything.
Top Bottom
Back