6000CL

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Efs1234

New Member
Oct 19, 2025
1
Chicago
Hi! Hoping someone here can help!

I have a heat n glo 6000cl-ipi-s. When I turn it on, the pilot light turns on without an issue... But the burner flame is very low and it seems that only some of the burners turn on sometimes, and takes awhile for them all to light.. We have cleaned the burner without improvement in the size of flames. I have attached an image so you can see what I'm working with. As you can see, the flames are very low and not all of them are lit.

Thanks in advance for your help!
 

Attachments

  • [Hearth.com] 6000CL
    IMG_20251019_184534.webp
    414.5 KB · Views: 1
Last edited:
Hi! Hoping someone here can help!

I have a heat n glo 6000cl-ipi-s. When I turn it on, the pilot light turns on without an issue... But the burner flame is very low and it seems that only some of the burners turn on sometimes, and takes awhile for them all to light.. We have cleaned the burner without improvement in the size of flames. I have attached an image so you can see what I'm working with. As you can see, the flames are very low and not all of them are lit.

Thanks in advance for your help!
You are going to need to have someone test the pressures. Could be dirt or bad valve.