A solution for those impossible-to-get Vermont Castings remote controls?

[Wingnut49707]

I am also looking for one of these remotes.

 

[Nel]

Do you have another one of these remotes you can sell me?

Remoteless.
Have a remote and Ng valve. With circuit board on a vavle tray .

 

[Nel]

I am also looking for one of these remotes.

Yes l do.
Remote and full ng complet valve tray .

 

[Chumley1]

Yes l do.
Remote and full ng complet valve tray .

Seems to be a popular item. I too am after an RT8220a but don't need the whole valve and cct board. Do you have more of these. Thx

 

[Cmcd]

Hi Nel
Do you have another remote?

 

[Cmcd]

Yes l do.
Remote and full ng complet valve tray .

I also need one. Am I in luck?

 

[patriciag]

Hi. Robert
Yes we can work something out.

Nel:
I have the same remote honeywell rt8220A-2. The display works fine but no longer connects to the fireplace. I've tried re-synching it with no luck. Do you have anymore of these? Not sure if these remotes can be fixed. I'm new to this site so I apologize if I'm asking this in the wrong area.

Patriciag

 

[Fingerlakes Fireplace]

UPDATE!
About the Vermont Castings/Honeywell remotes.
I have sold all of my used remotes that I had, and any remotes that I get in the future, I am going to save for my local customers.

I do have some of these valves, that I got to work again by swapping parts off of other non working valves.
I assumed in the past that when these valves go bad, it is always a fault in the control module on the bottom of the valve. I just recently discovered that the pilot solenoid, and main burner solenoid go bad sometimes. So I swapped parts on the valves, and now have some functioning valves again.

 

[Lbw]

Hello got 1 rt8220a in hand.

I am also looking for this remote. Can you help?

 

[Lbw]

Yes I do.
I'm in canada.
Send me a picture of your remote,it's is in very good condition .

View attachment 292375 View attachment 292376 View attachment 292377

Hi Nel, I am interested in this remote if you have one.

 

[peter13c]

Hi, I am also looking for a rt8220a 1032 remote. If anyone can help let me know.

 

[abby0077]

hey Nel any chance having anymore remotes?

 

[Clayt]

UPDATE!
About the Vermont Castings/Honeywell remotes.
I have sold all of my used remotes that I had, and any remotes that I get in the future, I am going to save for my local customers.

I do have some of these valves, that I got to work again by swapping parts off of other non working valves.
I assumed in the past that when these valves go bad, it is always a fault in the control module on the bottom of the valve. I just recently discovered that the pilot solenoid, and main burner solenoid go bad sometimes. So I swapped parts on the valves, and now have some functioning valves again.

FF;
Re: Vermont Castings - RV8310D,E Receiver/Valve (Propane)
Perhaps I have a bad solenoid, I have the propane version. I am on my second remote, …. Starting to act up again. Everything seems to work however it often will not shut down when reaching the set temp, …. Say 70, …… it will sometimes heat to75 or 76 then shuts down.
Does it make sense that this could be a valve problem and not a problem with the remote?
Thanks in advance for your help.

 

[Hctom]

Looks like my transistor on remote “burned out” anybody know of anyone who repairs these or has electronic diagram?

 

[Nel]

UPDATE!
About the Vermont Castings/Honeywell remotes.
I have sold all of my used remotes that I had, and any remotes that I get in the future, I am going to save for my local customers.

I do have some of these valves, that I got to work again by swapping parts off of other non working valves.
I assumed in the past that when these valves go bad, it is always a fault in the control module on the bottom of the valve. I just recently discovered that the pilot solenoid, and main burner solenoid go bad sometimes. So I swapped parts on the valves, and now have some functioning valves again.

Good job.
Head scratching .
Works

 

[Hctom]

Unfortunately my problem appears to be the remote because the valve continues to blink that it is good. I guess i am still looking for a remote. Unless it could still be a problem with the valve? Valve works in local.

 

[JPcan]

Hello got 1 rt8220a in hand.

Hi Nel, do you still have that remote i'm close by in Ottawa could pass by Mirabel

 

[Bracattack]

So were any of you able to get a remote from member Nel? How was the price. I need one but find it concerning that someone claims to have so many, so want to hera from actual buyers before trying to get one.