Looking for some answers, I have an Accentra Insert that has been working well until last night. The stove failed to ignite, did not show any errors and kept feeding pellets filling the ash pan? Board? ESP? Igniter?
Accentra Insert
- Thread starter Bill Bennion
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
hockeyfan
Member
Try manually lighting the stove. If that works, you have more evidence to take a closer look at the ignitor.
Mine has done the same thing from time to time over the past 6 years I've had it.
On one occasion, the igniter was shot. Replaced it and all was good.
Every other time build-up in the burn pot seemed to be the culprit. A good cleaning and things were back in order.
On one occasion, the igniter was shot. Replaced it and all was good.
Every other time build-up in the burn pot seemed to be the culprit. A good cleaning and things were back in order.
I'll try a new igniter tonight, I still don't know why it kept feeding pellets, I've only been using it for about two weeks, It shouldn't be dirty but I will check ESP
- Status
Similar threads
