Changing oil on Husky 22

[NH_Wood]

Hey all,

Anyone know where the drain plug is located to drain the oil on this splitter? Thanks!

Cheers!

 

[blujacket]

Bottom of the motor, above and to the left of the pump. You need a 3/8 socket extension. It is messy. I am ordering one of these before the next change.

http://www.northerntool.com/shop/tools/product_200311689_200311689

 

[Halligan]

Do you mean engine oil or hydraulic oil?

 

[Bocefus78]

Oil drain is on bottom of the motor... under the mounting platform, theres a hole drilled for easyt access.

 

[LLigetfa]

Oil drain is on bottom of the motor... under the mounting platform, theres a hole drilled for easyt access.

Easy access? Not on my MTD. When I drain the oil it doesn't run straight down but rather goes all over the place. I plan to extend the drain with some pipe and a 45 degree elbow.

 

[Bocefus78]

Easy access? Not on my MTD. When I drain the oil it doesn't run straight down but rather goes all over the place. I plan to extend the drain with some pipe and a 45 degree elbow.

I was referring to the huskee 22 ton.

 

[MasterMech]

Try one of these.



http://www.northerntool.com/shop/tools/product_200338119_200338119

I don't know anyone who is serious in my business that turns drain plugs unless absolutely necessary.

 

[LLigetfa]

I was referring to the huskee 22 ton.

Yes, I'm sure you were, given your sig and the title of this thread.

 

[blujacket]

Try one of these.



http://www.northerntool.com/shop/tools/product_200338119_200338119

I don't know anyone who is serious in my business that turns drain plugs unless absolutely necessary.

Sold! That is the cats meow right there.

 

[NH_Wood]

Thanks everybody! And I definitely like the liquid vac idea! Cheers!

 

[LLigetfa]

I have a manual suction gun that I use to suck oil out where there is no drain plug.