England 25-PDV fans

[heriva12]

Hi, I recently purchased a used England 25-PDV. It was working fine and recently the ignition fan quit working. I bypassed the board and connected the fan directly to 110 and worked fine. Any recommendations on what to trouble shoot or look for to correct the issue?

Appreciate the time and help!

 

[ericofmaine]

There's a good chance its a bad triac. My stove did the same thing due to a pinched wire where the fan feed goes underneath the exhaust piping. I have the newer board but did what you have done until I could repair my board. Look for pinched wires would be my advice.

Eric