On my Enviro M55 when I lower the feed the rate does the number of times that the auger engages go down per minute or does the duration of time the auger remains on when it engages go down. I don't seem to see any difference when I lower my feed rate.
Feed Rate
- Thread starter GHCPNY
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
See page 7 in this manual ( all circuit board models)
#1 8.5 sec. 3 sec
# 5 1.07 sec 3 sec
Hope this is what you are looking for
See manual all heat levels there
https://enviro.com/custom_content/docs/manuals/C-12145%20Instruction%20PELLET%20Service%20Manual.pdf
Heat range off on #1 8.5 sec. 3 sec
# 5 1.07 sec 3 sec
Hope this is what you are looking for
See manual all heat levels there
Similar threads
