Q&A gas insert fireplace

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

QandA

New Member
Staff member
Nov 27, 2012
0
Question:

My wife and I are looking to replace our current woodburning fireplace with a gas insert fireplace in our 200 sq. ft family room which is partially open to the kitchen area. I have been to several fireplace stores and now am totally confused. One salesman says an efficient radiant heat gas fireplace is all you need while another says a fireplace with a blower and thermostat is a logical choice. Based on the description of the area we want to heat what in your professional opinion is the approach we should take.



Answer:

Basically:
1. A gas log in an open fireplace is a solution only if you intend to use the heat on an attended basis for 1-3 hours per day. In this case- an unvented or partially vented log may do
2. A sealed- and vented (b vent or direct vent) insert is a great solution- which can be used as much as you want- and will provide a greater level of safety (no open fire)Of course- #2 costs a bunch more..but if you have the $$$- it's a good way to go. Most of the manufacturers on HearthNet sell the gas Fireplace Inserts. Jotul- Travis- HearthStone- etc. Others sell the unvented gas logs.
 
Status
Not open for further replies.