+1Guess it goes without saying . . . but I really, really, really like this thread.
+1Guess it goes without saying . . . but I really, really, really like this thread.
A little Viagra should fix those right up...Sorry, couldnt help myself...
Totally awesome thread. Thanks for the friendly reminders I always do this on the 1st of January with fresh batteries for every detector everywhere but I'm also going to make this a regular routine to check things and to clean things just before burning the first fire of every season.
I have a combination of smoke alarms with hard wiring and battery backup and then also smoke alarms running on regular battery power only for areas where wiring wasn't feasible. Every bedroom has a hardwired smoke alarm. Every level has a hardwired combination for carbon monoxide and smoke. And in areas where I would have any gas appliance I added alarms that plug to an outlet and then also have battery backup for smoke/Carbon Monoxide/Explosive Gas. I even added additional battery only ones above the alcove I created for my stove but within the central chase where the chimney runs just in case it ever allowed any excess smoke out of it. That's one area where I wouldn't know anything was wrong for a few minutes or more of fire.
As someone already stated, sensors have a limited lifespan which will vary typically by type (it isn't always 10 years, I've seen 7 and even 5 especially for combination alarms). Also as someone already stated everyone should make sure they have plenty of extinguishers and also that they know how to use them. Remember PASS: Pull the pin to the extinguisher, Aim the extinguisher at the base of the fire, Squeeze the trigger to release the retardant, and Sweep the retardant side to side at the base of the fire to extinguish it. Lastly from time to time at least annually "maintain" your powder type extinguishers by tapping them at the bottom base while holding them upside down with something soft like a rubber mallet. This will help to avoid the powder possibly "molding" into itself. This doesn't apply to liquid types.
Again an awesome thread, this is one of those where we should all sort of mention this to friends and family outside of hearth and help them too.
Relevant I guess to this thread . . . not my best work since they called and I didn't do much prep . . . usually they edit a bit better to make me sound a lot more intelligent than I am in reality . . . not so much this time.
(broken link removed to http://www.wabi.tv/news/33465/chimney-fire-prevention-tips)
Much better than I would have done Jake, one look at that anchor and my responses would have been, "Abuhhhhhh..."Relevant I guess to this thread . . . not my best work since they called and I didn't do much prep . . . usually they edit a bit better to make me sound a lot more intelligent than I am in reality . . . not so much this time.
(broken link removed to http://www.wabi.tv/news/33465/chimney-fire-prevention-tips)
Much better than I would have done Jake, one look at that anchor and my responses would have been, "Abuhhhhhh..."
I'm guessing the news is pretty popular in Bangor.....![]()
![]()
We use essential cookies to make this site work, and optional cookies to enhance your experience.