So I tried to take the buck 91 apart to check the cat...two screws that hold the housing in the back of the stove are turning without biting which means I can not drop the housing. Called Buck and they are at a loss why the bolts are not dropping into the holes to allow them to bite and allow me to break the nut. They basically said I need to cut them out...since I don't have a torch, am thinking of trying to hit them with a grinder to bust off the nut. I clearly will need new bolts...but anyone out there have any ideas how to get them out? I can not get a hack saw back there (way into the stove) and hiring someone with a torch will certainly cost an arm and a leg.
I am really disappointed and feelinga bit blue not knowing what to do...any thoughts will be apprecaited.
Cheers,
Matt
I am really disappointed and feelinga bit blue not knowing what to do...any thoughts will be apprecaited.
Cheers,
Matt