Harman p43 troubles

[joe simmons]

On my second season with it up until yesterday no issues, now the pellet feeder is feeding pellets constantly overflowing the burn pot into the ash pan , it stops for a few seconds and the. Goes again, I even shut it off and the darn thing still fed pellets , anyone have this issue,? Not getting any blinking codes either ! It fired up like normal too

 

[gfreek]

Did you try turning it off, unplugging and plugging it back in ? last cleaning with cleaning ESP (exhaust sensor probe)..?

 

[PJPellet]

I have had my P43 for 5 years. This happened to me for the first time about two months ago. I did as mentioned above; unplugged and then plugging it back in fixed the problem. Sometimes these computer boards get flaky and act strange. Keep us posted. Good Luck.

 

[Peterfield]

Had it happen to me once, did the same thing, unplugged the stove for a few minutes and that seemed to cure it.

 

[bags]

Kinda like re-booting a router or computer. I unplug mine at every thorough cleaning but it is only on its second season also so I do not expect any issues.

 

[TonyVideo]

I put in a UPS that the manual listed for conditioning and never had the issue pop back up for me.