Harman TL300 damper problem

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
J

jmp

New Member
Feb 23, 2018
1
Paradise mi
How can you tell when you have adjusted the damper correctly? I did mine about 2 weeks ago because the door would open on it’s own.after the stove heats up there is a lot more “slop” in it. All this started after the bolt snapped that holds the top access door to the handle Assy
Any thoughts or ideas?
Thanks
 
Last edited by a moderator:
I just purchased a new damper for my TL300. However the small holes to tie the brick clips are not threaded and I can not tie down the clips... Am I supposed to thread them myself or the damper I purchased is defective? Please help...
 
You must log in or register to reply here.

Similar threads

B
Wood burning fireplace, glassdoors masonary chimny SMOKEY SMELL
Replies
20
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
jjam
J
dreamingofpalmtrees
Smoke alarm 4am, house filled with smoke Whitfield Advantage
Replies
1
Views
596
The Pellet Mill - Pellet and Multifuel Stoves
Washed-Up
Washed-Up
C
Door might be bent
Replies
11
Views
509
Regency
CT Treeman
C
D
Proper Air Control & Throat Flue Damper Operation for an old Fisher Insert
Replies
1
Views
861
Fisher Stove Information, Parts, History and More
coaly
coaly
L
Very large chimney for 6" flue
Replies
6
Views
835
The Hearth Room - Wood Stoves and Fireplaces
Solarguy3500
Solarguy3500
Top Bottom
Back