I was hoping someone could shed a little light on the way this stove's distribution fans work. gave the stove a good cleaning last night, fired it up and it seemed like it was running for at least five minutes or more and the fan speed was only at 10% (when on the automatic setting). I changed the fan setting to manual and 98% and the fans were blowing fast as expected. but turning the fans back to auto, it would drop back down to 10% after a couple of minutes. i'm kind of leaning towards i may have just been impatient, but it seemed like it had been running long enough and the air was hot enough for the fans to ramp up. if i remember correctly, the exhaust air was running 265 degrees. is there a setting that could be adjusted to tell the fans to kick on at a certain temp?
thanks! -- Brian
thanks! -- Brian
