Hearthstone II - how to change top side discharge to back side discharge

[monkdude]

I need to change my discharge from the top side to the back side.
Anyone done it or have suggestions?

This link is to the old rebuild discussion with pics:
https://www.hearth.com/talk/threads/hearthstone-ii-rebuild-need-help.7038/

Thank you,

monk

 

[DougA]

I have an Equinox so I'm not sure that the changes on yours is the same as mine. All I had to do was remove the stove pipe, put your hand inside and find the four bolts that are holding down the plate on the back, remove those and then put everything back (including gasket) to the top opening. I was worried the bolts would be stuck but they came off fairly readily. The only problem is getting your hand in their to reach the far side bolts.

 

[mstoelton]

If it is anything like the Clydesdale, you need to remove the 4 bolts that hold it, rotate it 180 degrees and reinstall the bolts.