Hello,
New guy in Iowa here with a new Lopi Answer installed last week. I have been doing nothing but reading here for 3 days straight and am still learning.
The manual and the warning label on the stove simply say not to overfire the stove. What are the ideal operating temps for the top of the stove (under the heat surround shield) and in the stack (double walled SS)
I am wondering if as heavy as this stove is built and as small as the firebox is if it is possible to really overfire it.
Also a newbie question here again on this stove. Can / will you always see the secondary burn or is that only when there are actual flames? Does this model do a second burn on high burn mode or only when the air is limited with the slider control somewhat out?
As small as this stove is I am working on finding that happy medium between good burn times and high heat.
Thanks all and Merry Christmas
New guy in Iowa here with a new Lopi Answer installed last week. I have been doing nothing but reading here for 3 days straight and am still learning.
The manual and the warning label on the stove simply say not to overfire the stove. What are the ideal operating temps for the top of the stove (under the heat surround shield) and in the stack (double walled SS)
I am wondering if as heavy as this stove is built and as small as the firebox is if it is possible to really overfire it.
Also a newbie question here again on this stove. Can / will you always see the secondary burn or is that only when there are actual flames? Does this model do a second burn on high burn mode or only when the air is limited with the slider control somewhat out?
As small as this stove is I am working on finding that happy medium between good burn times and high heat.
Thanks all and Merry Christmas