Hi All, I'm a pellet newbie although have spent the last week searching the internet on Napoleon troubleshooting and interestingly enough, I'm always led back to this site.
If anyone has any suggestions to help with my issue, I'd sure appreciate them. I have a Napoleon NPS40 pellet stove, which I have just loved using. I downloaded the pellet stove manual (I'm a new home-owner and the stove came with) to figure out what I've run into.
My stove doesn't ignite (the ignitor doesn't glow red/orange) and the blower on the left (exhaust blower) blows constantly. I've taken it apart and cleaned it but to no avail.
Anyone have any ideas? I've checked to make sure the 200 degree reset button is fine, I've depressed it as much as seems reasonable but don't want to break it. It's popped out about 1/8-1/4 of an inch and I've pushed on it with about 40lbs of force (more force than I tamp my espresso grind with) but it didn't depress.
Thank you anyone for any assistance!
If anyone has any suggestions to help with my issue, I'd sure appreciate them. I have a Napoleon NPS40 pellet stove, which I have just loved using. I downloaded the pellet stove manual (I'm a new home-owner and the stove came with) to figure out what I've run into.
My stove doesn't ignite (the ignitor doesn't glow red/orange) and the blower on the left (exhaust blower) blows constantly. I've taken it apart and cleaned it but to no avail.
Anyone have any ideas? I've checked to make sure the 200 degree reset button is fine, I've depressed it as much as seems reasonable but don't want to break it. It's popped out about 1/8-1/4 of an inch and I've pushed on it with about 40lbs of force (more force than I tamp my espresso grind with) but it didn't depress.
Thank you anyone for any assistance!