We are not very familiar with pellet stoves we have a kozi Olivia and it keeps over-feeding pellets that is kozi Koz y any suggestions
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Over feeding
- Thread starter helen19
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Bioburner
Moderator
Welcome.
First thing would be to read the manual and see the details of a good cleaning. More than a good share of stove malfunctions are from blocked passages or venting.
Older stoves have the usual wear issues and top of the list is door seals compressing and leaking. Test is simple and we call it the dollar bill test. Simply put the bill in the door gasket area and close and latch the door and if the bill is tough to pull out it is good, repeat all around the doors
First thing would be to read the manual and see the details of a good cleaning. More than a good share of stove malfunctions are from blocked passages or venting.
Older stoves have the usual wear issues and top of the list is door seals compressing and leaking. Test is simple and we call it the dollar bill test. Simply put the bill in the door gasket area and close and latch the door and if the bill is tough to pull out it is good, repeat all around the doors
Bioburner
Moderator
I dont know of the design. Only heard of the stove and unfortunately thats probably why no replies with insights.
Check the exhaust fan for oil ports. I may need the motor windings blown out and a couple drops of oil to get it back to full rpm. Lot of the older fan motors need a couple drops of oil per season to properly run.
Check the exhaust fan for oil ports. I may need the motor windings blown out and a couple drops of oil to get it back to full rpm. Lot of the older fan motors need a couple drops of oil per season to properly run.
kenora
Member
call the company that made it (KOZI) ..they are in Winnipeg Canada
204-452-9907
I have been in there factory (for a tour) and they are very helpful
204-452-9907
I have been in there factory (for a tour) and they are very helpful
Similar threads
