Pacific energy super 43 - smoke coming into house

[Loghomeken]

PE super 43 with a cat installed that i bought used. Everytime i open door to load wood it is always a challenge to not get smoke into the house. House is no where near air tight; ive opened doors and windows with no avail. Chiminey is within spec for height off roof and away from peak.
Ive burned wood stoves for years and ive never have this problem.
I just lined my chiminey with 6". Stove flu is 7" with 90⁰ elbow and an adapter to 6" thinking that would help bit it is about the same.
I dont have a baffle at all, i was wondering if anyone has a PE super 43 that can share a picture of inside fire box. If i recall correctly from the manual i found the cat is a factory add-on and when it is added the baffle is removed.
Any pictures or advice would be appreciated.

 

[begreen]

Super 43? There's a Super 27 but I haven't heard of this one. Cat installed in a PE?? 7" flue? Please post some pictures of this stove. It's an odd one by description.

 

[Burnin Since 1989]

@begreen you don't remember that model from back in 2008? haha

Thread 'Question to the old timers; PE Super 43'

Oct 17, 2008

Hi,

I think I have a good one for you guys.

I own a PE Super 43. It was purchased with the house I bought last January. The stove is in pretty bad shape. No parts are available for this model as it was discontinued in 86.
I've been digging for info and have found very little. I'm having it fixed by a welding shop. I had new baffle mounts made from the measurement of the old ones. I managed to get a baffle plan from the PE guys through my local shop.

Now we are at the part were we put it back together.

The insides width is 22" the baffle plans shows 12" X 12" plate with opposite lips...

• llevesque
• Replies: 10
• Forum: The Hearth Room - Wood Stoves and Fireplaces

 

[Burnin Since 1989]

If i recall correctly from the manual i found

Is it a paper copy or online?