Quadrafire 4300 ACT Cracked Manifold

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

MosinFan42

New Member
Nov 14, 2026
1
SW Ohio
Hello everyone! New member here with a new to me wood stove.

I recently picked up a Quadrafire 4300 ACT manufactured in 2004. The stove is solid except for two cracks that have developed in the rear air manifold. From the research I've done this seems to have been a common issue for the ACT model stoves. Fortunately the cracks on my stove aren't as severe as others I've seen.

I see that in the past Quadrafire offered a repair kit in the form of a bolt on steel plate. This kit is now long out of stock but I own a decent mig welder and have the tools to do some light fabrication. I observed in the newer ACC stoves that Quadrafire eliminated the rear air manifold completely. I'm contemplating welding closed either 8 holes in the center of the manifold or all of them after welding up the cracks. Might even weld a strip of 3/16" steel over the manifold after the welds are ground smooth.

If anyone has experience with the repair kit I would be very interested to hear how it has held up. If closing up the holes in the rear manifold are going to severely hamper the performance of the stove please don't be afraid to call me an idiot. Any input is greatly appreciated.

[Hearth.com] Quadrafire 4300 ACT Cracked Manifold [Hearth.com] Quadrafire 4300 ACT Cracked Manifold [Hearth.com] Quadrafire 4300 ACT Cracked Manifold
 
Last edited: