I have a winterwarm small and would like to know of its ok to completely fill the foreboding. The reason I'm asking is because the smoke chamber is in the back of the stove about half way up and I want to make sure I'm not supposed to keep the wood lower than that bc that would mean I only have room for a couple splits. Thanks in advance.
Question about winterwarm loading
- Thread starter ill_make_you_famous
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil. -
Super Cedar firestarters 30% discount Use code Hearth2024 Click here
- Status
The manual says for reloading:
Add the fuel, smaller pieces first. If it is necessary to use wood smaller than the 18” (460mm) optimum size, be sure to fill the firebox as completely as possible by loading the wood pieces alternately on the left and right. Split wood will fill the firebox more completely and reduce the frequency of reloading.
Add the fuel, smaller pieces first. If it is necessary to use wood smaller than the 18” (460mm) optimum size, be sure to fill the firebox as completely as possible by loading the wood pieces alternately on the left and right. Split wood will fill the firebox more completely and reduce the frequency of reloading.
- Status
Similar threads
