Sar biomass corn stove help needed

[Kazman]

Good afternoon everyone. My brother has a sar biomass corn furnace that has worked well for the past several years. Over the past year it started burying the fire with corn. Figured out that the turntable motor was not working and replaced it. While doing some other testing I had a bunch of wires come loose. I cannot seem to find a schematic for this furnace at all and I'm hoping that somebody can take pictures of the inside of their control box hopefully telling me where all the wires need to go. I have attached pictures of the mess that I have. Additionally I have a little short blue jumper wire that I don't know where it goes. I sincerely hope somebody can help. If possible, please let me know what terminal on the plc goes to the white connection blocks. I really don't want to try to put power to it at this point so I don't blow anything