Started the knotty pine ceiling installation today!

  • Thread starter Thread starter ScotO
  • Start date Start date
  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
S

ScotO

Guest
Got finished up on the insulation in the fireplace portion of our living room project Friday evening, also got the surround sound speaker wire and the HDMI cables ran, so Saturday morning we started installing the ceiling boards. First installed a 6mil clear plastic vapor barrier and taped the seams and staple holes with gorilla tape. Then was careful to seal the plastic around each of the Halo Airtite can lights with some high-temp silicone. After ripping the first board as a starter strip (that room was built in 1936 and was not square by any means) we ran the ceiling from around 12:30pm Saturday afternoon until 12:30am this morning. Captain Morgan helped us stay with it all evening long! Got back up at 8:00am and finished that room up. Wife really likes it, and I'm pumped to get the other side started this week. Some pics of the progress to date......




[Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today! [Hearth.com] Started the knotty pine ceiling installation today!
 
  • Like
Reactions: zap, smoke show, Lewiston and 9 others
Wow, Scotty, you be an animal.:eek:
12 hrs. would put me in the ER. How are the shoulders feeling?:cool:
That looks really nice. How did you finish the piece at the peak?
Seems like you mentioned doing a false beam or something, to hang a light or fan.
 
Papa D, I'm gonna make a temporary millwork piece for the peak, then next summer do false rafters and ridge beams. I just wanna get the room in useable condition for this Thanksgiving. As for my shoulders, they feel fine. Now my lower back, well that's a different story!
 
Scotty, your liner is WAY too short, smoke spillage guaranteed;lol
The pine looks Great. I also love the strings/insulation idea, I've never seen that before.
 
  • Like
Reactions: ScotO
fox9988 said:
Scotty, your liner is WAY too short, smoke spillage guaranteed;lol.
Click to expand...
Foxy, I'm probably gonna have some draft issues there, aren't I?:p;)
fox9988 said:
The pine looks Great. I also love the strings/insulation idea, I've never seen that before.
Click to expand...
It took some thinking on my part (with a little help from Captain Morgan) but I had that idea, and man does it ever work nice! If you ever have to put insulation in from the underside, that is most definately the way to do it.
 
  • Like
Reactions: fox9988
DianeB said:
reminds me of a hull of a boat...very nice Scotty
Click to expand...
Thanks Diane. I still have a lot of trim work and finishing to do, but the brunt of the ceiling is up on that half of the room. Going to tackle the insulation on the other half (which is to the back of me in these pictures) throughout this coming week and HOPEFULLY get to the pine board installation on that half next weekend if all goes to plan....
 
Im a big fan of some Rum... Rum and Cokes! Mmmmmmmm....

All jokes aside. Your an animal Scott. Absolutely beautiful. Your a true craftsmen.

I would love to do my ceiling like that, as I already did the Family room with knotty pine walls. .

Cant wait to see the finished pics! !
 
  • Like
Reactions: ScotO
DexterDay said:
Im a big fan of some Rum... Rum and Cokes! Mmmmmmmm....

All jokes aside. Your an animal Scott. Absolutely beautiful. Your a true craftsmen.

I would love to do my ceiling like that, as I already did the Family room with knotty pine walls. .

Cant wait to see the finished pics! !
Click to expand...
Thanks Dex. I appreciate all the encouragement, too. I can't wait to have it done, but I do really enjoy doing the work. I will be really excited this time next month if I have the ceilings done, the drywall hung and mudded, and the stone started on the fireplace. Still have to install the big mantle beam (it's a doosy) and before that there is the steel stud framing all around the fireplace. I got me an aggressive schedule the next two months, I pray I can stay with it and get it done........I'll need you guys to keep pushing me.;hm
 
  • Like
Reactions: DexterDay
Thanks guys. Right now I'm cleaning out the second part of that room and getting ready to tackle the insulation and ceiling in that section. Pics to follow....
 
looking good, have done some like that in the past. alot of work but worth it in the end
 
  • Like
Reactions: ScotO
looks great....keep the pictures coming.
 
Scotty Overkill said:
Got finished up on the insulation in the fireplace portion of our living room project Friday evening, also got the surround sound speaker wire and the HDMI cables ran, so Saturday morning we started installing the ceiling boards. First installed a 6mil clear plastic vapor barrier and taped the seams and staple holes with gorilla tape. Then was careful to seal the plastic around each of the Halo Airtite can lights with some high-temp silicone. After ripping the first board as a starter strip (that room was built in 1936 and was not square by any means) we ran the ceiling from around 12:30pm Saturday afternoon until 12:30am this morning. Captain Morgan helped us stay with it all evening long! Got back up at 8:00am and finished that room up. Wife really likes it, and I'm pumped to get the other side started this week. Some pics of the progress to date......
Click to expand...

Any estimate on what that ceiling cost you? I'm finishing up paneling my basement and like the looks of that much more than drop ceiling.
 
AP, this wood came from New Hampshire! I bought it off of an Amishman up in Lock Haven, PA, and it was really affordable. I bought 96 14' tongue and groove boards for around $500 bucks! Its all grade 1 and 2, very nice stuff.
 
My BIL is a contractor and just put a ceiling like that in a church...except they put up something like 5k sq ft. He said it wasn't any fun...I imagine this isn't either. Looking good...keep yer head down and keep on workin.
 
  • Like
Reactions: ScotO
lukem said:
My BIL is a contractor and just put a ceiling like that in a church...except they put up something like 5k sq ft. He said it wasn't any fun...I imagine this isn't either. Looking good...keep yer head down and keep on workin.
Click to expand...
Actually, it's not too bad. Now the insulation, on the other hand, SUCKED!
 
Nice work! Incredible what you accomplished in such short time.
 
Oy, my back aches just looking at this. I'm impressed by the progress Scotty. It's coming along really well.
 
  • Like
Reactions: Eatonpcat
Status
Not open for further replies.

Similar threads

P
1st stove install, questions
Replies
61
Views
10K
The Hearth Room - Wood Stoves and Fireplaces
bholler
B
M
New Wood Stove (Woodstock Progress Hybrid) Project
Replies
18
Views
5K
Woodstock Soapstone
trguitar
T
DB Cooper71
New setup
Replies
15
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
bholler
B
PelletPractitioner
New Ravelli RV100 Classic self-install and photos
Replies
19
Views
13K
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
BJP
Sequoyah Paradise E3400 - What to do to refurbish it?
Replies
16
Views
7K
The Boiler Room - Wood Boilers and Furnaces
andyd772
A
Top Bottom