Upland 207, glass door replacement?

[mr.forks]

Hello forum,
I've been trying to track down replacement doorfor my cast iron woodstove, an Upland Model 207. As far as I can tell, the castings have been sold and resold a few times to a few different companies. At some point, there was a pellet stove version with a glass/ceramic door, which raises a few questions. Can I just buy the glass/ceramic door and install it? The stove currently has double doors, not a single large door. Is there some reason I shouldn't?
Where would I find one?
Thanks

 

[DAKSY]

Try here:

Replacement stove parts | Woodman's Parts Plus | Stove Gas Wood Stove Parts

Woodman's Parts Plus offers over 20,000 in stock parts for your wood, coal, gas, oil or pellet unit, as well as barbecues and outdoor power equipment. Over 400 old and current manufacturers, with unique parts and patterns.

www.woodmanspartsplus.com

Not sure if they can help, but it's worth a shot.

 

[begreen]

Nu-Tec was sold to US Stove and the Upland 207P became the Breckwell SPC50. Are you sure the door from the pellet stove will fit correctly on the original Upland?
https://www.woodmanspartsplus.com/184/details/25614/SPC50/28497.html

 

[mellow]

Is Craig still around? Might know where some are.

A little digging, I found some for sale:
(broken link removed to https://nwct.craigslist.org/app/d/new-milford-wood-stove-upland-207-high/7259559290.html)
(broken link removed to https://binghamton.craigslist.org/for/d/greene-upland-207-cast-iron-wood-stove/7280977374.html)
(broken link removed to https://philadelphia.craigslist.org/tls/d/westtown-upland-207-wood-stove/7257092039.html)

 

[mr.forks]

Nu-Tec was sold to US Stove and the Upland 207P became the Breckwell SPC50. Are you sure the door from the pellet stove will fit correctly on the original Upland?
https://www.woodmanspartsplus.com/184/details/25614/SPC50/28497.html

I am not sure at all, Figured here is a good place to ask.

Is Craig still around? Might know where some are.

A little digging, I found some for sale:
(broken link removed to https://nwct.craigslist.org/app/d/new-milford-wood-stove-upland-207-high/7259559290.html)
(broken link removed to https://binghamton.craigslist.org/for/d/greene-upland-207-cast-iron-wood-stove/7280977374.html)
(broken link removed to https://philadelphia.craigslist.org/tls/d/westtown-upland-207-wood-stove/7257092039.html)

My original post wasn't clear
My current doors are fine, I was looking to replace them with glass door, as I never use the front doors, and being able to see the fire might be nice.

 

[begreen]

I am not sure at all, Figured here is a good place to ask.

My original post wasn't clear
My current doors are fine, I was looking to replace them with glass door, as I never use the front doors, and being able to see the fire might be nice.

With no air wash in the stove, glass on the door may carbon up quickly.

 

[romeopeoples]

I purchased a glass door on ebay, it was from a reading coal stove that uses the 207 casting which was also used in the nutec and breckwell 207's. from what I've read they're all the same front casting and use the same glass door design that was on the original upland 207 and 107.

 

[BigAl1962]

I purchased a glass door on ebay, it was from a reading coal stove that uses the 207 casting which was also used in the nutec and breckwell 207's. from what I've read they're all the same front casting and use the same glass door design that was on the original upland 207 and 107.

I have the upland 107, I am looking for a glass door for my upland. Going to look for the reading door that you spoke of. So far no luck, any chance you have a picture of your door?

 

[romeopeoples]

I have the upland 107, I am looking for a glass door for my upland. Going to look for the reading door that you spoke of. So far no luck, any chance you have a picture of your door?

Attached a few of the door, it fits well on my 207. The door is new old stock from this ebay seller antique-attic-finds, Their ebay store is besidearchstanton (see attached screenshots) and located near Union Springs, NY. They don't list any of those doors, but back in January 2021 he mentioned he may have some in his storage. I haven't used the door yet, stove is still waiting to be reconnected. The door is connected with screws that I had. To mount permanent I'll have to open up the door pin holes slightly since the 207 pins are larger, just need to remove the plating in the holes. I don't know if the Reading logo is removable, it may be etched in the glass. I'm going to try paint remover before I fire it up, that's a project for another day since I have to finish the chimney first. Also this door doesn't have front vents as shown in the original upland literature. Here's the eBay link for the door...

(broken link removed to https://www.ebay.com/itm/NOS-READING-STOKER-COAL-STOVE-COMPLETE-NICKEL-DOOR-W-HANDLE-GLASS-GASKET-R126-/383893294792?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0)

Here's another contact I made back in February 2020.
Bull Supply in Maryland.
"We have the door in stock in black only and that is all that is available from the factory if that would work."
Thanks, Allen (Buddy) Bull Jr
Mailing Address
Bull’s Supply Co Inc
PO Box 314
Maryland LINE, Md 21105
Physical Address
Bull’s Supply Co Inc
311 Old Freeland Rd.
Freeland, Md 21053
Phones (410)357-5995 (Office) (410)812-7266 (Cell)
Email bullssupply@comcast.net
Website www.bullssupply.com

I also checked with the reading stove company back then, but I can't remember the results.