Valve trains over 400,000 btu

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
D

David T

Member
Sep 22, 2012
26
I believe underwriters labortories requires special valve train designs that includes special safety devices when a gas appliance is over 400,000 btus. Would Ul's requirement superceed state gas codes and is 400,000 btus be the standard for what would be concidered "Large Appliances"

Thank you
 
Last edited:
Status
Not open for further replies.

Similar threads

Macroman
Chimney Brand vs Meets CAN/ULC S629 Approval
Replies
11
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
jjam
J
F
Want to change out zero clearance fireplace with BK Ashford 25 or 30
Replies
3
Views
2K
Blaze King
BKVP
BKVP
C
converting a ZC alcove over to wood stove , adequate output without electricity
Replies
21
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
EatenByLimestone
EatenByLimestone
H
PE Alderlea T6 versus PE SUMMIT CLASSIC LE versus PE FP30
Replies
9
Views
4K
Pacific Energy
HealthAdvocate
H
C
Does EPA Exempt / Decorative means poor efficiency?
Replies
7
Views
3K
The Hearth Room - Wood Stoves and Fireplaces
Czech Ivan from NJ
C
Top Bottom