Vintage fans

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

EatenByLimestone

Moderator
Staff member
Hearth Supporter
For some reason I think vintage fans are cool.

This winter, one of my fans/heaters at the cabin had the heater part quit. The fan worked fine. Ok, should be an easy troubleshoot. I grabbed a multimeter and started testing the heating circuit. I couldn’t find the break. I called another set of eyes over and ran through my findings. We looked over everything we could see and found no breaks. We ended up plugging it in. He saw a spark below the heating coil. I pulled it apart and found that the cloth wires frayed under it. Probably just a little bit of rubbing every year since the 50s, lol. Since it was rubbing against metal, I guess it’d still have continuity some times.


I’ll get it fixed tomorrow. I can’t find my spool of stranded wire I know is in the shed from when I was wiring the boat.
 

Attachments

  • [Hearth.com] Vintage fans
    IMG_9707.webp
    277.2 KB · Views: 49
  • [Hearth.com] Vintage fans
    IMG_9706.webp
    207.5 KB · Views: 48
  • Like
Reactions: Whitenuckler
Went out and looked again and found my spools. Red and black. That’s not going to help the next one to tear this apart! I went down a few cabins and they had an old spool of green. Still not the best, but better than 2 whites that were there first and better than the red/black combo that could have replaced it.
 
For some reason I think vintage fans are cool.

This winter, one of my fans/heaters at the cabin had the heater part quit. The fan worked fine. Ok, should be an easy troubleshoot. I grabbed a multimeter and started testing the heating circuit. I couldn’t find the break. I called another set of eyes over and ran through my findings. We looked over everything we could see and found no breaks. We ended up plugging it in. He saw a spark below the heating coil. I pulled it apart and found that the cloth wires frayed under it. Probably just a little bit of rubbing every year since the 50s, lol. Since it was rubbing against metal, I guess it’d still have continuity some times.


I’ll get it fixed tomorrow. I can’t find my spool of stranded wire I know is in the shed from when I was wiring the boat.
That is high temperature wire. The last time I used some was for wiring the electric heater for my smoker egg. I had to order it.