Latest activity
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
-
Washed-Up replied to the thread Added outside air to my Whitfield.It’s better with an F’n OAK….FOAK ;) -
I do get a kick out of this forum. I always thought it was an FAK (fresh air kit) not an OAK
-
SidecarFlip replied to the thread Harman ignitor install tip..Maybe some day I'll move into the 21st century with an ignitor stove...lol My ignitor is a handfull of pre soaked in charcoal lighter... -
BKVP replied to the thread Blaze King Ashford 30.2 Questions.End readings are not of value. Bring a piece inside (not in same room as the stove) for 24 hours. Then split the wood and take a... -
SidecarFlip replied to the thread Enviro Empress ~ 2006 vs Regency hampton gc60.In all actuality a stove will last almost forever, you just replace parts like motors and fans and maybe a control board if you don't...
-
SidecarFlip replied to the thread Harman Pf100 stainless burn pot.I actually fabricated the second one from 304 stainless sheet. 304 is easy to work with but you must TIG weld it.
-
SidecarFlip replied to the thread Harman Pf100 stainless burn pot.Don't have a Harman but both my burnpots are stainless and after 15+ years on pellets and corn mix, I have no appreciable wear. With...
-
SidecarFlip replied to the thread Mt Vernon E2 not responding to thermostat.Have a friend with one and he has Quad t'stat as well and he had an issue with his. I'll have to call him and see what the cure was...
-
Diabel replied to the thread 2021/22 VC Owner thread.It will fit. Be patient, you did this before! -
That is a wide range. If it is closer to 25' I'd add a damper in the stove pipe. -
If you should start developing a increasing pile of AM coals you could take some time to burn them down before reloading. Wide open...
-
Yep. And it’s all cleaned out. I ripped all the guts out again. Laid the stove back on some 6x6 to try this again. I’m going to do a dry...
-
First break in fire tonight. Thinking if I stay up late enough I might do the 2nd one tonight too.
-
I’ve seen it both ways. I prefer outside air kit because it’s simple and to the point on its purpose. Call it a fresh air kit and...
-
Jjohn26 replied to the thread Old LOPI wood stove insert.A pic of the brick pattern would help as well could be a X. LX, or Fl. I believe they ere some changes with in those models as well...
