pellet

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. Scott Pond

    Moving the thimble 6" only on inside of wall?

    Hey folks. Fairly new hear, but hope you can help me out. I am renovating a room that has my Eco 65 in it. The stove is located in a corner and the thimble was installed butting up against the corner of two walls. I have added 6" depth to all the walls which now means that the inside of the...
  2. R

    Adjusting Fuel Pulse Duration

    Greetings All, I have inherited a Tarm 4.0 pellet boiler as a new homeowner. The manual is not clear on adjusting the fuel pulse duration. Any knowledgeable suggestions on how to accomplish that? Thanks!
  3. B

    UPS back-up for Pellet Stove

    This topic came up as an aside on another recent post. Although not specifically about a pellet stove, many of these stoves have a computer board (mother board) that needs protection. In Northern Ontario, Hydro One's incoming current has significant fluctuations and are hard on sensitive...
  4. movemaine

    Door gasket sealant - do I need to let it fully cure?

    Just replaced my door gasket and I'm wondering if I need to let the gasket sealant (silicone based) to fully cure before turning the stove back on. The sealant only says that it will be cured within 24 hours, but gives no indication of whether the stove can be running or not.
  5. H

    I'm thinking about buying a used Harman XXV

    Hi, I recently found a Harman XXV on Craigslist and I've been thinking of replacing my wood stove. My question is if the stove is worth it. It's been through 8 seasons and looks like it's been very well maintained. It looks almost brand new. The owner has only done routine maintenance and it...
  6. bworre71

    Hudson River West Point

    Good Morning, I have a westpoint stove. Trying to get it up and running for the new season. When I turn the stove on it gets burning and then the flame, backdrafts (best word i can think of) into the pot I open the door and the flame comes back up. It never turns the room blower on and then...
  7. W

    What vacuum do you recommend?

    Getting Quadra-fire Vermont AE installed in the next month or so (looking forward to winter!). What vacuum do you recommend I get . Was considering the Cougar Ash but some of the reviews on Amazon aren't so good. What is a good quiet vacuum to clean a pellet stove? Many thanks.
  8. W

    What happens when the power goes Out?

    Have used wood stoves all my life but in my new home will be installing a pellet stove - most likely the Quadra fire Vermont AE (various reasons including the appearance, it is quiet, it seems to have simple battery backup). Will do direct vent and AOK. My questionson are: what happens when...
  9. W

    Harman XXV vs Quadra Fire Vermont A E

    Trying to decide between these 2 pellet stoves. Looks like the Quadra Fire pellet stoves built 10 years ago were unreliable from older forum posts. How about Now? Also, which is Quieter?
  10. C

    How to get my wifi enabled pellet stove online.

    Hi, I have an Artel Easy S pellet stove. http://woodpelletstove.co.uk/products/product_artel_Classic-S.html It is wifi ready but needs I assume some type of adapter to either connect it over wifi or wired to my router. This is the connection I have at the back. The stove has many functions and...
  11. pelletdude

    uuni pellet pizza oven

    Not heating related...but pellet powered. Very cool...cooks a pizza in under 2 minutes. Plus lots of other things.
  12. N

    Enviro Empress insert has power, nothing else working.

    Hey everyone, my wife and I just acquired an Enviro Empress insert. It was missing the exhaust blower when we got it. I ordered a brand new one and just installed it. I have power to the unit and controls but when I click On, nothing happens. It clicks on the mother board but no other noises...
  13. J

    Oil and Pellet stove one thermostat

    Hey everyone! New to the forum first post. Hoping someone can help me with this question. I have a Quadra fire pellet stove and an oil boiler for heating my home. When oil is cheap I run the boiler and when it's expensive I use pellets. I've been using one thermostat which is centrally located...
  14. mainermomma

    Harman XXV - overflowing ash pan in less then 2 days

    We had our Harman xxv installed last October. We liked the idea of the Harman. Good quality, everyone who had one, loved them. So we spent the money, and it wasn't cheap. Ran great for the first season. Had the company we bought from come out and clean it and service it for the next season...
  15. Jonkman

    Any West Michigan people out there...what do you use and where do you buy?

    New to pellet burning and I live in West Michigan, just wondering if there are any Michiganders out there and what do you use? And where do you get it? I only know of a few places in West MI and am wondering if I am missing some good places to buy pellets. Currently I have Isabella Pellets...
  16. S

    Drolet Eco 65 pellet stove - 3 years old

    Hi, I have a drolet Eco 65 with outside air kit installed in basement. It has run fine for 3 years, with the exception of having to replace the blower/fan last year, which I did. I cleaned the chimney and stove out for this year and so far have burned 8 bags of pellets. Over the weekend, I...
  17. D

    thermostat issue with pellet stove

    I have a Quadra-fire Santa Fe - its probably about 6 years old. The thermostat seems to be in trouble. I have the lux cheapy heat-only manual thermostat. Only a couple of times did it know that the temperature had decreased and it turned on again, as it was supposed to. I had to hit reset for...
  18. skylerporter2112

    Enviro Empress - Pellet Venting Regulations

    Hi, I am putting in my new pellet stove and I need some advice. In my manual and in other places it has said that I just need to make sure the rain cap is 24" above where the vent exits the roof. I have read elsewhere though that it must be 2' above and 10' from the highest point of the roof. I...
Top Bottom
Back