Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Okay don't laugh, but being a newbie I would like to know at what height the flame should over the top of the burn pot be, say when the settings are set for low, medium and high blower? Thanks and don't laugh!
My flame varies depending on the setting. All the way down is a 2 inch flame in the burn pot, 1/2 way is about a 6-8 in flame and I have never turned it all the way up. I have a Austroflamm Integra I.
Okay don't laugh, but being a newbie I would like to know at what height the flame should over the top of the burn pot be, say when the settings are set for low, medium and high blower? Thanks and don't laugh!
Both my stoves, depending on the heat setting, can have a flame that ranges from just a little higher than the burnpot on low to just about touching the heat exchenger tubes on high.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.