Magnum Baby CountrySide-AC powered Control Panel - FS Wood pellet stove does not stay lit? Fixed!!

[Don2222]

Hey Guys

I have the new upgraded Stainless Steel Wood pellet pots for the Baby CountrySide. Looks like they seal good also!

 

[smwilliamson]

This morning, I ordered a new pellet-only firepot from AES. Since their delivery times are very slow (it's been 2 hrs since I ordered and it's not here yet... :ahhh: )

 

[brown352]

Can anyone make a suggestion. We have a Baby Countryside, we've cleaned it, and cleaned it again, cleaned the exhaust, cleaned everything we can clean, and it's still not burning correctly. The auger keeps dumping pellets into the pot, and it eventually burns out because there are so many pellets. The auger is dumping pellets about 7 times a minute.

 

[brown352]

I forgot, we are using the pellet pot, and not the corn pot.

 

[GMadd]

Thanks Dexter for these links.

Magnum Baby Countryside Installed and Running
https://www.hearth.com/econtent/index.php/forums/viewthread/83873/P22/

Restrict Air Wash = Better Burn.
http://magnumheatforum.com/viewtopic.php?f=43&t=279&sid=86bb480537aeb4a19491edad6f00b077

The stove has the upgraded larger CFM combustion Blower and the upgraded burn pot WITHOUT the top 2 rows of holes!!
The ash pan gasket from the factory is very leaky and the venting was not cleaned in a couple of years.

See pics below

1st Pic - Pellet Burn Pot with no top 2 rows of holes
2nd Pic - New Original Burn Pot with 2 top rows of holes

Seems like the air wash mod link is outdated. Anybody have info on this? Thanks.