Hello Everyone, this my first time on this forum, and the reason is Im puzzled on which zero clearance stove to install in my new contruction home and how to set it up. Im not totally green to wood burning, but Ive never had a stove of my own, it was always my parents or relitives. So what I got is a 1800 sq ft, 2 story home, in the planing stages anyway, its in Alaska so it gets pretty cold in the winters 20 above to 20 below normally. Its a 5 star rated home with natural gas heat. The fireplace dealers here kind of limit my selection but Ive looked a lot at the RSF onyx or opel, fireplace extrodinar, and the supreme plus. The supreme I have not herd much about, but it looks like a good quality stove. Anyone know much about the Supreme stoves? But my biggest consern is how to build the chase. The plans call for an outside wall chase....built out...so the stove is flush to the wall. Everything Ive reserched has told me not to build the chimney outside because temp difference in the chimney and house causes backdraft when not in use and during start up. Any thoughts or ideas would help. Ill see if I can get picture of the layout on the main floor on here. Gillen