A while back Lukem or someone was asking about transporting saws and equipment on the ATV . . . I mentioned that my cousin fabricated a box for my front end. I finally took a picture of the box yesterday.
Box is relatively shallow in depth to allow most of my headlight to point over it while night riding (without anything in the front basket -- although one picture makes it look like most of the light is blocked due to the angle I took the pic). Box is secured with three U-bolts and nuts with a rubber matt underneath to prevent metal to metal chafing.
As you can see I often use bungys . . . I think these were left on from a few weeks back when we were riding the trail system and I brought along the chainsaw in case we came across any blowdowns. Normally, if I'm not doing any higher speed riding and am just puttering about I use fewer bungys . . . sometimes no bungys
.
Box is relatively shallow in depth to allow most of my headlight to point over it while night riding (without anything in the front basket -- although one picture makes it look like most of the light is blocked due to the angle I took the pic). Box is secured with three U-bolts and nuts with a rubber matt underneath to prevent metal to metal chafing.
As you can see I often use bungys . . . I think these were left on from a few weeks back when we were riding the trail system and I brought along the chainsaw in case we came across any blowdowns. Normally, if I'm not doing any higher speed riding and am just puttering about I use fewer bungys . . . sometimes no bungys
.