• Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
  1. J

    Harman Absolute 63 Blown Fuse Still After Some troubleshooting

    Hello, I am new to this forum but was reading through some of the posts and found there are very knowledgeable people who are part of it so I joined in hope of learning more and possibly coming up with a fix for my Harman Absolute 63. I came home a week ago to find the stove was turned off and...
  2. D

    Harman P68 Control Board Burnt

    I have a strange issue with a Harman P68 control board burning up on the fuse connector. No other component on the board looks damaged at all. The fuse itself remained intact and still has continuity. Igniter has no sign of damage or arcing, 50 ohms of resistance when cold too. I assume there's...
  3. DoAll

    New Lopi Deerfield Pellet Stove pop fuse after about 5 bags of pellets.

    We installed the Lopi Deerfield stove back in October to replace a 10-year Astoria. Last year we install radian floor heat. The 2 work well together has a combo. Until tonight when the Deerfield pop the fuse. We normally run the stove an hour takes the chill out of the room in the morning...
  4. D

    Harman P68 testing igniter, control board & fuse

    Harman P68 igniter is not working. Everything has been cleaned so I’m onto testing the igniter, the igniter leads and the control panel. What specific numbers am I looking for with these tests, where/what do I test on the control board and how do I test the fuse on the control board? Thanks.
  5. J

    Igniter hopefully just a fuse? King pellet 5502M

    Ignighter test failed after the stove just "went out" this morning. Hopefully it is in the suggested inline fuse and not the circuit box ($500.00!!!!) Does anyone know where that inline fuse is or which fuse it is on the circuit board, I can't find a circuit board schematic. Thanks for any...
  6. P

    Fuse Blown - St. Croix

    My St. Croix Prescott blew its fuse, and I don’t know why. There’s no evidence of bare wires or damage to wires. I’ve unplugged the auger, versa motor, igniter, and convection fan individually and the fuse blew again each time, so I don’t think it’s those components. Doesn’t seem like I can...
  7. D

    Harman PF 100 Blown Fuse

    My Harman PF 100 Furnace just lost power. I woke up to the smell of smoke coming from the furnace in the basement. Fire was out and I noticed the power on the main switch was lit on, but on the control panel were no lights including the red power light. Chimney was cold, but there was still a...