Looking at the info on the Breckwell site and in the Big E manual, it looks to read that the rear of the Big E only needs one inch clearance. However in the diagram they have, the spacing looks to be more then one inch when compared to where it shows the 3" clearance between the stove pipe and the wall if using vertical venting. Is the drawing not to scale, or do they mean one foot for rear clearance?
Also, I will be installing horizontally directly through the garage wall. Only about 24" of total vent pipe. What is used to connect/seal the 3" vent pipe to the outlet of the stove? Any special adapter?
Also, I will be installing horizontally directly through the garage wall. Only about 24" of total vent pipe. What is used to connect/seal the 3" vent pipe to the outlet of the stove? Any special adapter?