Can't find the slider damper...M55 Insert

[bostonfan49]

So my Enviro tech said he would be happy to check my Slider Damper but suggested I do it myself before he comes out and puts the gauge to it. He said " Remove the metal panel on the left side, make very small changes......" What the Pellet The metal panel is atached to the sliding top? Is it by any chance...on the other side of the surround? Thanks, Bill

 

[imacman]

P. 19 in the Technical manual:

www.enviro.com/fireplace-products/pellet/fireplace-insert.html#M55castfpi

 

[bostonfan49]

OK...I found it Down near the bottom to the left, a metal slider piece with a hole in the end of the piece. I assume that pulling it out increases the air? Bill

 

[imacman]

OK...I found it........I assume that pulling it out increases the air? Bill

Yes, on most pellet stoves pulling the damper control out increases the combustion air. I don't know how long the adjustment rod on that stove is, but I'd suggest making adjustments approx. 1/2" at a time.....and give the stove about 20-30 minutes to "adjust" before making any more.