Drolet 60 L code

[david camarra]

I am getting the L code on my Drolet 60 but the stove is lite and running. However the fan is not running at speed. The sensor at the exhaust seems to check out. Im wood and son pellets that are new to the stove. This stove is on a thermostat and this seems to happen after a restart with the thermostat.
Any help would be appreciated.
Dave

 

[johneh]

Welcome to the forum.
Do you have a manual for your stove?
If not here is one.

https://www.drolet.ca/file/45433A_08-01-2014.pdf

See bottom of page 41 this may help you

 

[david camarra]

Welcome to the forum.
Do you have a manual for your stove?
If not here is one.

https://www.drolet.ca/file/45433A_08-01-2014.pdf

See bottom of page 41 this may help you

I have a manual which is not telling me the problem. I have gone through all the tests.

 

[david camarra]

Let me explain what is going on now. It does not light intermittently. Pellets are loaded but it does not light. Throughs a code of L. Reset it and next time it lights. I would say every other time it might not light. Its on a thermostat.

 

[david camarra]

Welcome to the forum.
Do you have a manual for your stove?
If not here is one.

https://www.drolet.ca/file/45433A_08-01-2014.pdf

See bottom of page 41 this may help you

I have check all that out. As i have wrote below the problem is intermittent. Sometimes it lights and sometimes it doesn't. When it does not it shows the code L. Stove has plenty of pellets loaded so its not a auger problem.