I replaced the exhaust fan on my pellet stove after it was squeaking and shutting down. New fan worked great except when I turned off stove, fan did not turn off after 45 minutes. Red flame light also stayed on. Thoughts?
Exhaust Fan Enviro Empress FPI
- Thread starter moving2fla
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
johneh
Minister of Fire
Just behind the combustion fan/motor is the120 deg
temperature sensor. Remove the sensor and clean
will have a lair of insulating ash on it. Clean it off
reinstall and try your stove. Let it run a couple of
hours then shut it off. The fan should go off in
about 15 min.
temperature sensor. Remove the sensor and clean
will have a lair of insulating ash on it. Clean it off
reinstall and try your stove. Let it run a couple of
hours then shut it off. The fan should go off in
about 15 min.