Exhaust temps without turbs on Eko

[huffdawg]

I just cleaned out my fire tubes on the Eko. I forgot to put the chain turbs in.. I lit the fire and I have the fan on 70.. looks to be too hot with temps at 596. I'll turn it down now to 50.
You can observe on the burn temp on the public display link in my sig. below.

 

[woodsmaster]

Very nice display ! Yes them are some high temps.

 

[huffdawg]

Dropping now , fan speed 50 , fan shutter half open.

 

[velvetfoot]

That link does not work for me; it's just a diagram. This does: (broken link removed)

 

[PassionForFire&Water]

I just cleaned out my fire tubes on the Eko. I forgot to put the chain turbs in.. I lit the fire and I have the fan on 70.. looks to be too hot with temps at 596. I'll turn it down now to 50.
You can observe on the burn temp on the public display link in my sig. below.

Man, a shop temp of 72.9F.
To hot for me to work, or is this a tanning saloon
Really nice job !

 

[huffdawg]

NoFo built the display. I have a suite above my shop, My last tenant was cold blooded, the current one likes it warm. I will be installing some panel rads up there sometime in the near future.. then I will be able to turn shop back down to 65. Its been a warm day here also,that makes a big difference when you have a 6 " heated slab.